Fire sprinkler systems in Bedford
Fire sprinkler systems in Bedford, installed, serviced and tested by Sentry Sprinkler Protection, with a free survey and a fixed price in writing. No survey fee, no travel charge, and an emergency line that answers outside working hours.
- 21 miles from our yard in Kettering
- ISO 9001 certified
- Covering MK40 to MK45
Bedford: photograph by Gary Houston, CC0 , via Wikimedia Commons.
What we do in Bedford
Designed, installed, tested and certified by us. Nothing subcontracted, and the same standard whatever the postcode.
Design and installation
New systems, extensions and upgrades, designed, installed and commissioned.
Fire sprinkler installation
Sprinkler servicing
The full BS EN 12845 routine, from the weekly gauge and alarm check to the annual service.
Fire sprinkler servicing
Sprinkler tanks
The water supply behind the system, inspected, cleaned and replaced when it is past it.
Sprinkler tank maintenance
Fire pumps
Electric and diesel sets proved under flow, not just started and signed off.
Fire pump servicing
24/7 emergency
A leak, a failed pump or a discharged head, answered out of hours.
Emergency sprinkler repair
Dry risers
Six-monthly inspection and the annual pressure test, with the certificate your fire risk assessment asks for.
Dry riser testing
Wet risers
Charged risers, their pumps and their tanks, tested together because they only work together.
Wet riser servicingWhat this costs, and what moves the price Wet, dry, pre-action and deluge explained
Fire protection in Bedford
Sentry Sprinkler Protection provides fire sprinkler servicing in Bedford and across Bedfordshire, from its base in Kettering. A county town on the Great Ouse with a mix of Victorian commercial fabric, a strong independent school sector, and industrial and distribution development around the edges. Schools and older commercial buildings are two of the more demanding cases for suppression design.
Where we tend to end up: the independent school estate, the Victorian commercial fabric along the High Street and Embankment, and the industrial and distribution units on the edge of town.
Boarding accommodation is sleeping risk in a building that is often historic and often extended piecemeal. The system has to follow the building as it was actually built, not as the original drawings show it.
Buildings this applies to
- Schools and boarding accommodation
- Victorian and period commercial buildings
- Industrial and distribution units
- Residential blocks and conversions
What is actually built in Bedford
Bedford is a county town on the Great Ouse with three distinct building stocks, and the first of them is unusual: a strong independent school sector with boarding accommodation. Boarding is residential, high-occupancy and occupied by children, which puts it among the more demanding cases for suppression design and among the strictest for how and when work can be done.
The second is Victorian and period commercial fabric along the High Street and the Embankment. Older construction rarely has the fire separation a modern design assumes, which is exactly why suppression earns its place there, and exactly why the installation is harder.
The third is conventional: industrial and distribution units around the edge of town, classified by what they store and how high they store it.
Why this matters in Bedford
-
Boarding accommodation is residential, on a term calendar
Sleeping accommodation falls under the life safety standard, and the work has to fit the school calendar. Holidays are the only realistic window for anything requiring isolation, which means booking well ahead rather than on the anniversary date.
-
Safeguarding changes how the visit runs
On a school site the practical constraints are access, supervision and timing rather than hydraulics. It is worth agreeing all three before the engineer arrives rather than at the gate.
-
Period commercial buildings lack modern compartmentation
Victorian fabric often has none of the separation a modern layout assumes. That raises the value of suppression and complicates the route the pipework has to take.
-
Edge-of-town units follow the goods
Industrial and distribution units are classified under BS EN 12845 by what is stored and how high. A change of tenant or stock is a design question, not a paperwork one.
The systems Bedford actually has
Servicing and installation in roughly equal measure, with dry riser testing where height requires it. The school estate is the part that most needs planning rather than the part that most needs engineering.
Getting there: Twenty-one miles, on the A428 and A421. An easy run, and the school work is booked around term dates rather than around our diary.
Not sure which standard your Bedford building is held to?
It is a survey question rather than a paperwork one, and the survey is free. We read the building and the policy rather than assuming from the postcode.
The work, not the town
These are our own jobs rather than stock photographs. We have not claimed any of them were taken in Bedford, because that is not something we would be able to show you.
All 62 photographsWorth reading before you ring
From first call to certificate
Four steps, the same on every job.
-
01Free survey
We look at the building and its records, and tell you what it is due.
-
02Fixed price in writing
Every item priced line by line. No survey fee, nothing added afterwards.
-
03The work, on your dates
Isolation agreed before anyone arrives, kept as short as the job takes.
-
04Certificate and record
A certificate and a photographed defect list, ready for your insurer.
- Start
Book the free survey
Tell us the building. We will tell you what it is due.
Book a free survey
Free survey · fixed price in writing
Tell us what you need. We will tell you what it takes.
Four quick taps and your details. A free survey and a fixed price in writing, with no survey fee and no obligation.
Mon to Fri, 7am to 5pm. Emergencies any hour.
Request received
We’ve got it from here.
Step 1 of 5 is done. Here is how the rest goes.
- Request sent Done
- 2 We call you Next
- 3 Free survey
- 4 Fixed price
- 5 Work done
Bedford questions, answered
We look after boarding accommodation in Bedford. What is different?
It is sleeping risk in a building that is usually historic and usually extended more than once. The system has to follow the building as it was actually built rather than as the original drawings show it, and that difference is normally found on site, not on paper.
Do you already work in Bedford?
Yes. It is 21 miles from our yard and one of the sites we hold an annual service contract on is a manufacturing plant on Manton Lane, so the town is a regular run rather than an occasional trip.
Want a price for this building?
An engineer walks the plant room, counts what is actually there and writes it up. The survey is free, the figure is firm, and it holds for thirty days. No obligation either way.
Where Bedford is on our patch
21 miles from our yard in Kettering, inside the ring we are in most weeks.
Towns near Bedford
We cover all of England from our base in Kettering, so if your building is between two of these it makes no difference to us. Distances are straight-line, from Bedford.
Certified, and audited on a schedule.
ISO 9001, certified by BRE Global and accredited by UKAS. Somebody independent audits how every job is planned, recorded and signed off, on a schedule.
ISO 9001:2015
Certified by BRE Global, accredited by UKAS
An audited quality management system. It means the way a job is planned, recorded and signed off is itself inspected by somebody independent, on a schedule.
Working to BS EN 12845, BS 9251 and BS 9990. If your insurer or fire risk assessor wants the certificates themselves, ring us and we will send them over.
Tell us the building. We will tell you what it is due.
No survey fee to find out where you stand. Describe the site and we will tell you which intervals apply and what the visit involves.
Request received
We’ve got it from here.
Step 1 of 5 is done. Here is how the rest goes.
- Request sent Done
- 2 We call you Next
- 3 Free survey
- 4 Fixed price
- 5 Work done